302 block
Cargo Master
Joined: Jun 2001
Posts: 2,571
Likes: 22
From: Oxford, Indiana
The early block will be a slightly thicker casting and will be heavier, but it's not really important unless you intend to make stupid amounts of horsepower. Dimensionally they are the same. The later block will also be machined for a 1-piece rear main seal where the earlier one will use a 2-piece. The 1-piece is preferred. The bigest difference is that the later block will probably have the taller lifter bores necessary for a roller camshaft. You can run a flat tappet cam in a late block with no problem, but it takes a later block if you want to run a roller cam with the factory roller components. I personally prefer the later blocks for everything I build.
Hotshot
Joined: Oct 2009
Posts: 16,173
Likes: 4,781
From: Burbank, WA
Trending Topics
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
The Versailles was basically a rebadged Granada/Monarch with a 'toilet seat' decklid.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread
Thread Starter
Forum
Replies
Last Post
unleashed
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Jul 17, 2007 11:06 PM
bron1967
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
Oct 22, 2004 12:40 AM
