4x4 not working correctly????
Tuned
Joined: Aug 2011
Posts: 376
Likes: 4
From: San Antonio, TX
Yes, what Dcham said. You can use heat, we just use A/C down around these parts in January. 
Hubs worked fine then axle work happened then hubs don't work points to something not put back right. The dust in the hubs is good for them. It seats the bearings.
Hubs worked fine then axle work happened then hubs don't work points to something not put back right. The dust in the hubs is good for them. It seats the bearings.
Thread Starter
|
Logistics Pro
Joined: Nov 2010
Posts: 4,654
Likes: 20
From: Tewksbury, MA
As far as I know it worked before the axle work I never got to use 4x4 until this year bc my dad always took my truck to plow on snowy days so I never used it he said it was fine but me and him have to different views of fine lol, anyway I tried the vents and everything checked out so it must be at the axle correct? Or anywhere inbetween just not a big leak.
Thread Starter
|
Logistics Pro
Joined: Nov 2010
Posts: 4,654
Likes: 20
From: Tewksbury, MA
so im going to try and trace the vac lines and see if there is anything wrong with them possibly this weekend if its night enough but are there any other key areas i chould double check to see if they are working properly? also is the whole system basically right behind the battery except the vac lines that run to the axle?
Thread
Thread Starter
Forum
Replies
Last Post
