New intake!!
Thread Starter
|
Cargo Master
Joined: Mar 2006
Posts: 2,789
Likes: 5
From: Sand GAp, KY
New intake!!
Well I finally done it. I manned up and cut a 4" hole in my fender and fabbed up a scoop to cover it. I put it right where the F350 emblem should be on the fender (I will get pics tomarrow I hope). I got the idea this summer while driving with my arm out the window. I had my hand down along the body line dent and noticed that the air would hold my hand to the body if i angled it some. I figured it must be pushing some air so why not! Since the mod I have noticed a drastic reduction in black smoke at 45-55 mph when I have to put the pedal down and lower egts on long hills as well as faster drops in egts as well.
Posting Guru
Joined: Feb 2008
Posts: 1,795
Likes: 1
From: Lubbock, Texas
Trending Topics
Cargo Master
Joined: Dec 2010
Posts: 2,123
Likes: 5
From: Fort Worth, TX
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Thread Starter
|
Cargo Master
Joined: Mar 2006
Posts: 2,789
Likes: 5
From: Sand GAp, KY
Not so far. I have plans to add a cone type dry filter inside a cyclinder type housing along the fender soon. This all leading up to the custom exhaust maniflods and the hx35w turbo. I have the turbo and the flanges (cut then at work). Just need time and good weather to fab it all up.