Fuel Guage/pump/float problem
Thread Starter
|
Senior User
Joined: Oct 2011
Posts: 108
Likes: 0
Fuel Guage/pump/float problem
Can anyone give me some insight on why my fuel guage would be stuck on Full. It got stuck there one day when i was pulling some good size stumps and giving it some decent jolts. Would something come loose at the pump/float assembley? Broken wire somewhere? Anyone have this happen or know where a guy can start? Thanks for comments, JT
Freshman User
Joined: Feb 2010
Posts: 42
Likes: 0
From: Richmond
Friends excursion The float got stuck behind the wires for the sending unit. Had to drop the tank 4 bolts then take the sending unit out. Free the float and put back reverse order. He has not had a prob since. Im Thinking the jolts would cause the fuel to slosh around with enough force and get the float caught behind the wires.
Thread Starter
|
Senior User
Joined: Oct 2011
Posts: 108
Likes: 0
I was actually so excited that it was the problem that I didn't think about it happening again. My stump pulling days are over lol. I had to leave after I got things buttoned up. But the tank is still down. I will have a look and see if its possible to get them out of the way.
Thread Starter
|
Senior User
Joined: Oct 2011
Posts: 108
Likes: 0
ok since i didnt have the tank back up yet i did pull the o-ring off and pull the pump up. after looking at it i decided to put one zip tie to the fuel line that ran closest to it. really didnt seem like lot of room. wires and lines pull tight and i dont know enough about the actual pump at the bottom of the tank so i didnt pull alot. was also alot of dirt and dust around and was scared to get anything in the tank. My tank was strapped in to the skid plate with three bands. would have had to cut them to clean all rocks ect out from around the tank and wasnt sure how i would strap back together. so i did my little repair and replace the tank back up in the frame. fuel guage is working properly now. went and put gas in and it came up to where it should have and the trip computer gave me est miles to empty as should have. I'm sorry my knowledge isnt the greatest. but this site is making me learn every day. thanks to all that have posted
Trending Topics
Senior User
Joined: May 2009
Posts: 134
Likes: 0
Did Ford give us enough slack in the fuel lines to lower the tank enough? I think its getting time for my 01 V10 to get a new pump.
BRian
BRian
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Senior User
Joined: Oct 2011
Posts: 108
Likes: 0
After you get the inlet tube\vent tube unhooked you can lower it part way. Then the fuel lines and wires run thru a holder that they need to pop out of. Then you can lower and disconnect every thing and slide out. I parked with the rear tires on the high side of a curb and had lots of room to play
Fleet Mechanic
Joined: Oct 2010
Posts: 1,407
Likes: 155
From: Milwaukee, WI
Also great job sillyjt for letting us know how easy the job is.
Freshman User
Joined: Nov 2010
Posts: 26
Likes: 0
From: Toledo
I have a 2000 Ex and I just replaced my fuel pump only. I bought it at O'Reilly's the part number is E2318 and it was a Airtex pump. It was only $100 but came with the two strainers and tank seal which I though was a good deal. I bought the fuel filter also.
Thread
Thread Starter
Forum
Replies
Last Post
