ABS issue on 2005 XLT
Thread Starter
|
New User
Joined: Oct 2011
Posts: 4
Likes: 0
ABS issue on 2005 XLT
Ok, I changed my front brake pads and rotors last week and since then everytime I get in the truck and drive for about the first 2 or 3 miles when I push the brake pedal it feels like my ABS sytem is activating. Then it stops and the ABS light comes on but the brake pedal stops pulsating when depressed. Is my ABS going bad or did I possibly do something wrong? I have changed the rotors and pads before without problems....
Elder User
Joined: Aug 2011
Posts: 685
Likes: 0
From: Cape Coral, Florida
Hey KYMEDIC
I have a 03 Ranger and the same thing happened when i did my front brakes (new pads,Rotors and wheel bearings) i loosened the bleed screws on both calipers so i could spread the new pads enough to fit on the rotors. I asked a local Ford Mech an he said that i need to bleed all four wheels now. Just thought i'd pass it along!
Tony
AKA Stinky
I have a 03 Ranger and the same thing happened when i did my front brakes (new pads,Rotors and wheel bearings) i loosened the bleed screws on both calipers so i could spread the new pads enough to fit on the rotors. I asked a local Ford Mech an he said that i need to bleed all four wheels now. Just thought i'd pass it along!
Tony
AKA Stinky
Thread
Thread Starter
Forum
Replies
Last Post
niner
Brakes, Steering, Suspension, Tires, & Wheels
3
Sep 29, 2006 06:57 AM
ed2hess
1968-Present E-Series Van/Cutaway/Chassis
3
Nov 25, 2005 10:26 AM
CobraXP
Explorer, Sport Trac, Mountaineer & Aviator
3
Nov 26, 2002 11:21 AM
