Icp question

Reply Subscribe

Thread Tools

Search this Thread

Oct 4, 2011 | 04:47 PM

weldworks54

Thread Starter

Senior User

Joined: Apr 2009

Posts: 318

Likes: 0

Icp question

Can someone give me a icp reading off a good working sensor at 55 mph and 1500 rmp final drive gear mines reading about 1050 don't seem right to me

Oct 4, 2011 | 05:18 PM

wulfman

Posting Guru

Joined: Aug 2010

Posts: 1,924

Likes: 0

From: knox Tn

I haven't checked at that speed but at hot idle somewhere in the 640ish is about where everybody here is and mine was installed yesterday with a new pigtail

Oct 4, 2011 | 05:21 PM

cartmanea

Lead Driver

Joined: Jun 2007

Posts: 6,757

Likes: 5

From: Corvallis, OR

That number seems reasonable.

Oct 4, 2011 | 05:42 PM

NewToDiesels

Elder User

Joined: Dec 2010

Posts: 516

Likes: 0

From: LA = Lower Alabama

That's my neighborhood... 950 - 1100 psi Been watching mine like a hawk since replacing my HPOP a few weeks ago...

Oct 4, 2011 | 06:25 PM

weldworks54

Thread Starter

Senior User

Joined: Apr 2009

Posts: 318

Likes: 0

Mine is running 640's at idle I was watching mine going to and from work today just looking for a hint to my problem. It seemed low is the reason for asking but mine is right there with y'alls so I guess it's good to go. Thanks for the help