What is a hard code?
Hotshot
Joined: Jan 2004
Posts: 19,762
Likes: 1,079
From: St Louis
No. "Hard" codes are ones that not intermittent. It refers to a fault that is unambiguous. A completely and continuously faulty device or sensor would be considered to be a "hard" fault.
Of course, if you cannot pull any codes, you likely have some hard failure.
Of course, if you cannot pull any codes, you likely have some hard failure.
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
Thread Starter
|
Freshman User
Joined: Sep 2011
Posts: 36
Likes: 0
From: Williamsburg
thank you for the help i will try some of these things and if you have any other ideas please share cuz my tranny guy and i are both scratching our heads. talked to him yesterday and he said he unpluged the tps and said it help some when going into drive but still its very hard going into reverse
Thread Starter
|
Freshman User
Joined: Sep 2011
Posts: 36
Likes: 0
From: Williamsburg
got the problem fixed it was a broken wire between the computer and the tranny. once did the scanner right got a code and ran with it. was not doing the koeoff test the tranny guy though you would get same codes by skipping to the koeon test. oh well it happens
Thread
Thread Starter
Forum
Replies
Last Post
tcroson
1987 - 1996 F150 & Larger F-Series Trucks
5
Apr 1, 2015 05:50 PM
