mike-m
Logistics Pro
Joined: Jan 2001
Posts: 3,740
Likes: 37
From: Central NYS
IIRC, you only need a tool to remove the line. To install the line I think mine just push in until the circular spring "clicks" over the o-ring.
But if its all corroded like mine were, you will probably need new lines and new fittings that screw into the cooler.
But if its all corroded like mine were, you will probably need new lines and new fittings that screw into the cooler.
Thread
Thread Starter
Forum
Replies
Last Post
mikem78
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
13
Jul 29, 2004 05:04 AM
