GTP38R
Hotshot
Joined: Oct 2003
Posts: 17,791
Likes: 99
From: Ashland City, TN
I'm not 100% sure how the 38r oils, but he would need a super duty pedestal and the correct up pipes for the turbo.
He would also need the intake spider for it.
If he doesn't have an IC, he will have to build a re-route for the spider to put the air into the intake, which wont be big enough
So he'll need intake plenum's too.
I'll forward this to clay.
He has a 38r, and he can sell the parts to make it happen.
He would also need the intake spider for it.
If he doesn't have an IC, he will have to build a re-route for the spider to put the air into the intake, which wont be big enough
So he'll need intake plenum's too.
I'll forward this to clay.
He has a 38r, and he can sell the parts to make it happen.
PREMIUM SPONSOR
Joined: Feb 2009
Posts: 6,038
Likes: 73
Yes, it is shorter on the SD.
Basically he will need to convert everything over.
- Driver side manifold
- Up-pipes
- Pedestal
- Plenums
- Intake Spider
- Intake Boot
- I/C Tubing
Let me know if you need any parts as we have all of those in stock.
Basically he will need to convert everything over.
- Driver side manifold
- Up-pipes
- Pedestal
- Plenums
- Intake Spider
- Intake Boot
- I/C Tubing
Let me know if you need any parts as we have all of those in stock.
Thread
Thread Starter
Forum
Replies
Last Post
XBAJBUSX
1994.5 - 1997 7.3L Power Stroke Diesel
10
Oct 21, 2010 06:26 AM
