i found a good deal on a IH set up. i wonder if if i could just swap the hubs and all or is it easier to change the whole differential? truck had a 7 speed and my truck is a 6 speed. anyone here look up axle codes??

 

any NAPA s around ? they always turn drums !

 

too big for napa



That international rear the e brake is on the spicers 7 speed transmission. i have a 6 speed fuller. anyone have an idead if it will bolt onto my set up?

 

The e brake drum and backing plate is not going to just bolt to the fuller if its off a spicer. I dont think any of the parts will work together off the two transmissions. Im just making assumptions, Ive never seen either of these. Just letting you know based on my experiences.

As far as the hubs and drums, they are a bit more universal. There is somewhat of a standard for bearing ID's and OD's and for backing plate bolt patterns. But unless they're off the same setup, with the same ratings.. Its kind of a gamble. Just be sure to make the measurements if your not gonna swap the whole housing.

As long as the suspension is the same, probably be much easier to just swap the whole housing. Can always swap yokes to match your driveline.

 

my truck has a rockwell. the IH rear diff with the disc brakes is a spicer.

seems ford uses better tran and axle but has crappy brake system.

 

I guess I got deleted for breaking the rules while trying to help you out. Based on what I read I thought the drums weren't available and there wouldn't be a problem helping you out. The picture you have looks exactly like what I have. Maybe you can send me a private message or look on Ebay in a couple of months when I have time to list them. I probably will get expelled soon because I tried to help people. If I was getting big money for them I would pay to list them. I'm not going to spend $20 bucks with no guarantee I sell them. I've already ate a loss buying these for a friend who never paid me and Ford wouldn't take them back because they were special order. I've been in your shoes before with costs of parts making what your working on uneconomical.

 

i was wondering what happened. whats the part number?? how many lug holes??? i dont know how to do the pm but my email is janaohio@yahoo.com

i actually bought one from the IH dealer it was like $125 new. Unless they made mistake for that big hunk of metal.

unless you are close it must be $$$ to ship it.

 

We have a strict policy of no selling in the tech forums. If you choose to PM someone, that's your prerogative, but offering to sell parts when you're not a sponsor is a no-no. Read the guidelines.