ok flathead guys .. HELP !!!!!
Fleet Mechanic
Joined: Sep 2004
Posts: 1,674
Likes: 2
From: Rowland Heights
Thread Starter
|
Post Fiend
Joined: Mar 2007
Posts: 5,776
Likes: 2
From: springfield il
your better off without hair jeff as it hurts to pull it out !!!! i prefer slamming my head into walls etc. as you don't feel anything until after you come too ...........
yep on van pelts link there ed . found that one almost immediately a few years ago when i got her . still doesn't have it all though .!!!!
yep on van pelts link there ed . found that one almost immediately a few years ago when i got her . still doesn't have it all though .!!!!
Thread Starter
|
Post Fiend
Joined: Mar 2007
Posts: 5,776
Likes: 2
From: springfield il
well on a lark as i could not even with the math couldn't quite get things to work out . so i went out and took all the valves out of the engine and dug out all the others . my initial measurements were off . i only have two valves that are useable 
!! so were buying new ones . just haven't decided on oe's or what yet ................................
so cal / vern tardel has a dain good deal on 16 oe valves , then we got the stainless oe replacements that red has that are nice looking , so .... but i gave up on the sbc ones , too many headaches !!!!!!
!! so were buying new ones . just haven't decided on oe's or what yet ................................ so cal / vern tardel has a dain good deal on 16 oe valves , then we got the stainless oe replacements that red has that are nice looking , so .... but i gave up on the sbc ones , too many headaches !!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
roadrash63
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
15
Sep 2, 2009 09:31 AM
