6.0 No Start...AGAIN...
Post Fiend
Joined: Oct 2009
Posts: 12,123
Likes: 35
From: N. Fort Worth, tx
you can try a shop that sells hydrolic fittings. I have had good luck with that.
you can get the ipr connector by itself you dont need a whole harness. or if you have a wet loom laying around from a 444 (7.3)engine its also useable as a connector for testing.
you can get the ipr connector by itself you dont need a whole harness. or if you have a wet loom laying around from a 444 (7.3)engine its also useable as a connector for testing.
Thread
Thread Starter
Forum
Replies
Last Post
DixieDirt
1994.5 - 1997 7.3L Power Stroke Diesel
27
Aug 18, 2007 12:35 AM
