DP tuner issue
Thread Starter
|
Lead Driver
Joined: Jun 2007
Posts: 7,760
Likes: 27
From: Hampton, Maryland.
DP tuner issue
Hey guys, long time no post for me. Sorry about that, but I am having an issue, actually it's my Dad that is but I need some help.
He just got his 2002 7.3 tuned with a DP tuner last night. It was working fine last night and he drove to work this morning. He was goofing around with it today while at work and was trying to get it to go to the no start setting. It has a no number in the display but when he turns the key on the little dot powers up for a second then disappears. The truck will turn over but not start.
I told him to check the cable and make sure it's plugged in the back of the switcher and he said that it was. Any idea's?
He just got his 2002 7.3 tuned with a DP tuner last night. It was working fine last night and he drove to work this morning. He was goofing around with it today while at work and was trying to get it to go to the no start setting. It has a no number in the display but when he turns the key on the little dot powers up for a second then disappears. The truck will turn over but not start.
I told him to check the cable and make sure it's plugged in the back of the switcher and he said that it was. Any idea's?
Thread Starter
|
Lead Driver
Joined: Jun 2007
Posts: 7,760
Likes: 27
From: Hampton, Maryland.
Well heck, I feel stupid. I haven't used no-start in forever and he swears that the little yellow instruction card wasn't packed but Diane assures me it was. The box had been sitting around for a few weeks while he waited on gauges so I'm sure he misplaced it.
Anyway, thanks guys and for future reference for anyone who searches and finds this thread, to get the no-start feature de-activated, all you have to do is turn the key on and hold the left selector switch for 3 seconds and it will default to position 1 which is usually stock setting.
Thanks again everyone.
Anyway, thanks guys and for future reference for anyone who searches and finds this thread, to get the no-start feature de-activated, all you have to do is turn the key on and hold the left selector switch for 3 seconds and it will default to position 1 which is usually stock setting.
Thanks again everyone.
Hotshot
Joined: Jul 2003
Posts: 12,177
Likes: 40
From: Newport, WA
Well heck, I feel stupid. I haven't used no-start in forever and he swears that the little yellow instruction card wasn't packed but Diane assures me it was. The box had been sitting around for a few weeks while he waited on gauges so I'm sure he misplaced it.
Anyway, thanks guys and for future reference for anyone who searches and finds this thread, to get the no-start feature de-activated, all you have to do is turn the key on and hold the left selector switch for 3 seconds and it will default to position 1 which is usually stock setting.
Thanks again everyone.
Anyway, thanks guys and for future reference for anyone who searches and finds this thread, to get the no-start feature de-activated, all you have to do is turn the key on and hold the left selector switch for 3 seconds and it will default to position 1 which is usually stock setting.
Thanks again everyone.
Good to see ya around again some!
Thread
Thread Starter
Forum
Replies
Last Post
rich gill
1994.5 - 1997 7.3L Power Stroke Diesel
8
Aug 10, 2009 04:23 PM
SailCO26
1999 - 2003 7.3L Power Stroke Diesel
20
Jul 1, 2009 02:18 PM
chesterstroker
1999 - 2003 7.3L Power Stroke Diesel
19
Jan 27, 2007 11:53 AM
