Blend door repair by way of the glove box
#16
10-27-2010, 07:44 AM
#17
10-30-2010, 07:30 AM
https://sites.google.com/site/blenddoorford/
My problem was not the door. As the videos say, if the actuator is clicking, it is probably the actuator and not the door. I need a new actuator. But I can get heat by moving the damper manually until I get a new actuator. I did not need to cut into the main heater body to get to the damper. A 1/4inch hole in top of actuator can move the damper as well as mayhbe cutting access to the bottom of the damper rod. Can anyone tell me where to buy a new actuator?
My problem was not the door. As the videos say, if the actuator is clicking, it is probably the actuator and not the door. I need a new actuator. But I can get heat by moving the damper manually until I get a new actuator. I did not need to cut into the main heater body to get to the damper. A 1/4inch hole in top of actuator can move the damper as well as mayhbe cutting access to the bottom of the damper rod. Can anyone tell me where to buy a new actuator?
Thread
Thread Starter
Forum
Replies
Last Post
dwrestle
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
14
05-17-2011 12:52 PM
3360stepp
1961 - 1966 F-100 & Larger F-Series Trucks
3
03-31-2011 10:51 AM
