400 with a forged crank?
#3
Very, Very, Very few Fords ever had a forged crank. There have been a lot of cast cranks pushed up to and beyond 500Hp with very little failures attributed to the cranks. The FE's used forged in some FT motors and some 427's but Ford didn't seem to see a need for them until sustained RPM above 6500 was called for. There are quite a few 400 cranks running around in Windsor blocks that are pushing 500HP with a little shot of N2O every once in a while just to keep things interesting.
Thread
Thread Starter
Forum
Replies
Last Post
tomas428
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
20
02-10-2022 12:56 PM
Powergod
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
14
04-05-2005 02:10 AM
dani9678
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
12
07-21-2004 08:27 PM