pinout for door switch? dome light 93 replaced drivers door switch and still doesnt work

Reply Subscribe

Thread Tools

Search this Thread

#16

01-16-2017, 04:33 PM

NumberDummy

Ford Parts Specialist

Join Date: Nov 2006

Location: Simi Valley, CA

Posts: 88,826

Likes: 106

Received 651 Likes on 546 Posts

1993/94 F150: There were two types of courtesy lamp switches.

One was the same for both sides: 6C2Z-13713-AA (Motorcraft SW-6345) replaced E8DZ-13713-A same as Taurus/Sable and etc.

The other was specific to the right or left sides, but...

These two specific switches were replaced by one type for both doors: F4TZ-13713-AA (Motorcraft SW-5137) replaced E2TZ-13713-A & B

So today, the switch could be either F4TZ-13713-AA or 6C2Z-13713-AA

Reply Like

#17

01-16-2017, 08:58 PM

subford

Fleet Owner

Join Date: Aug 2005

Location: Easton,Ks

Posts: 23,609

Likes: 0

Received 233 Likes on 182 Posts

Quote:

Originally Posted by mrollings53

Subford, do you happen to know where that splice 5201 is in the truck for the dome lamp circuit?

The manual says it is:
S201=Seat belt retractor switch RH harness, near T/O to C302.
That does not sound right.

Reply Like

#18

01-16-2017, 09:20 PM

Jjona5

Junior User

Thread Starter

Join Date: Jul 2002

Location: Highlands

Posts: 54

Likes: 0

Received 0 Likes on 0 Posts

It is where the manual says it is. I just want to pull the seats so I can pull the trim panels easily. I could see it by popping the bottom out a little though.

Thanks for the wiring diagrams btw!

Reply Like