92 and 94 7.3 wiring differences...HELP?
#1
92 and 94 7.3 wiring differences...HELP?
Hey guys i have a question. what is the major wiring differences between a 94 idi turbo and 92 7.3 idi? ive been trying to find a pinout of the bulkhead connector on these trucks but i cant, even in the evtm. Anyone have any ideas? where else can i look, ill buy another manual if i have to......
#7
Trending Topics
#8
well the reason i ask is i have an 89 motor, that i updated to the 94 motor harness and then updated the entire under hood harness to a 94 idi but its the turbo harness. the 89 motor is not turbo. I have a 92 dashboard and wiring harness inside the truck. I have no power to the cluster and the ignition only powers the fss. i can jump it at the solenoid and will run, but not from the key. none of the cluster works.
#9
As for the bulkhead, im talking about the c202 connector that goes through the firewall and connects the underhood harness to the interior dash harness.
And ive been cruising google for 2 months trying to get it figured out. ive been on ebscohost, bought the evtm, looked at anything and everything i could find that even closely resembled what i needed. Needless to say ive learned allot about the idi, but not the information i need.... ive seen some people that have pm'd that connector pinout but its not public.
And ive been cruising google for 2 months trying to get it figured out. ive been on ebscohost, bought the evtm, looked at anything and everything i could find that even closely resembled what i needed. Needless to say ive learned allot about the idi, but not the information i need.... ive seen some people that have pm'd that connector pinout but its not public.
#14
Thread
Thread Starter
Forum
Replies
Last Post
creektrash
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
10
09-10-2006 09:50 PM