I am restoring both of my doors on my 66 and have run into a road block. The previous owner decided to paint the truck and only put half of the parts back on. I have found everything I need, except for the passenger side upper pivot bracket, the one that attaches with 2 bolts at the top of the frame. If some one knows of where I can get one or if they have a used one it would be greatly appreciated!

 

From the 64-72 master parts catalog, body illustration 200, page 5 the part of the vent window upper pivot which attaches with screws is base number 21464 (top pivot) attached by two 51751-S (U-365) screws ( these are Phillips head pan screws #8-32 by 1/4" long). I cannot figure out how to attach parts catalog image , but Bill will if he views thread.

RH side is C3TZ-8121464-A; from Google search one turned up on E-Bay, but listing is inactive.

LH side is C3TZ-8121465-A; Green Sales in Cincinnati, OH shows 15.

You can also try a PM to camperspecial65 on this forum, who may have them.

 

C3TZ-8121464-A .. Bracket-Front Door Vent Window Upper Pivot ~ Right (passenger) Side / Obsolete

Applications: 1963/66 F100/1100 / 1963/69 N/NT/T500/1000 / 1967/69 F800/1000 / Pic from 1964/72 Ford Truck Parts Catalog.

FRED GRANDE FORD in Richmond MI has ONE = 586-749-3141.

"Squire" Don (camperspecial65) email address: rott_weiler33@yahoo.com

 

PM me for more info as i know where one can be found...or both


- cs65

 

Much appreciated, thank you! If I can't find one ill let y'all know.

 

After much searching and calling all of the contacts listed I still was unable to track one down. Is there anyone out there who has a spare they would like to part with?

 

Post 4: Did'ja contact "Squire" Don (camperspecial65)? He said he knew where one or both were (most likely within 5' of where he was sitting!).

Don's email address listed in post 3.

 

Wells I ordered the parts I needed off of Don but never heard back from him so I'm just going to chalk that one up as a loss. Does anyone else know where I can find one of these. It's the last thing tat is stopping me from enjoying my truck this summer.

 

Have a set but don is on this some times is slow to get back to you I boughing a wheel from him now he well get back

 

Email replied to Jason... Ive been slammed the last month...


- cs65

 

Just wanted to say big thanks to Don for getting me the parts I needed to finish my project, finally finished both doors and have been driving it the past week..

 

Im glad they made it onto a nce ride.. A far cry from the crusty much overgrown 1 ton it was on....


- cs65