I am in need of bumper mounting brackets for a 1961 ford unibody custom cab front and rear. Does anyone have them or no where I can find them and what models will interchange. Also does anyone know how many of the 1961 Ford Custom Cab short bed truck that ford built Thanks

 

Welcome to the gang Field try Early Ford.com I live close to their shop, if you ask them they may have some old ones, for sure they can get you the new. Let me know, I'll swing by and ck. them out for you gayle.sutton@am.jll.com Show everybody your Ford

 

Here are the only NOS (Genuine Ford New Old Stock) brackets available. AFAIK, none of the following have been reproduced.

1961/63 F100/250 2WD:

C1TT-17752-E .. Right Front Bumper Bracket / Obsolete

GREEN SALES CO. in Cincinnati OH has ONE = 800-543-4959.

C1TT-17753-A .. Left Front Bumper Bracket / Obsolete

GREEN SALES CO. has TWO.

No Ford Dealer, no other obsolete parts vendor has any.
------------------------------------------------------
1961/63 F100/250 Uni's used the same painted or chrome contoured rear bumpers found on 1957/60 F100/250 Stylesides, 1961/66 F100/250 'wrong bed' Stylesides.

So, the following rear bumper brackets were used on all these trucks.

2) B7C-17787-C .. Right Rear Bumper Bracket-12 7/16" long / Obsolete

GREEN SALES CO. has ONE.

FREESE MOTORS in Monticello IA has ONE = 319-465-3241.

2) B7C-17788-C .. Left Rear Bumper Bracket-12 7/16" long / Obsolete

GREEN SALES CO. has ONE.

CARPENTER NOS OBSOLETE PARTS in Concord NC has ONE = 800-476-9653.

No other Ford Dealer or obsolete parts vendor has any.

 

Hey Bill really appreciate your reply called Green Sells and they are holding them for me just double checking for sure on these part numbers that they fit the 1961 ford unibidy styleside truck once again thanks.

 

unless you really want the 3 bolt bumper for the front, I would look for the 64 front brackets so you can use a 2 bolt bumper

 

I got the bumper bracket part numbers from the 1957/63 Ford Truck Parts Catalog, so I'm sure they are correct. Green has this same catalog, will verify.

 

Bill,

I need a left front bumper bracket for my '61 F-350. I noticed, however, that the part number you've listed here applies to "F100/250." I expected the F-350 would be the same but I'm now having my doubts (I came up with a right front bumper bracket of C1TT 17752-C from my '61 Ford Truck Parts Catalog -- I know it's full of errors -- but nothing for the left front bumper bracket).

Thanks in advance,

Steve

 

Digging up an old thread. I'm looking for front bumper brackets for a '61 F100. Doesn't seem like they are being reproduced. Anyone know where I could source a pair? A used set is fine.
Thanks in advance.
Cam

 

There's a used right and left front bumper bracket on ebay for 1961/63 F100/250 2WD .. listed under these Ford part numbers:

C1TT-17752-E Right & C1TT-17753-A Left .. Front Bumper Brackets / Obsolete

These part numbers are also listed in post #3. GREEN SALES no longer has the right side, only has 1 left side NOS

If your F100 is 4WD, the brackets are different.

 

Thanks ND, I just had a look and I have a later two bolt bumper, but I also have a repro 61-63 bumper, so I can either run newer brackets with that bumper (I assume), or the repro bumper and those brackets.
Cam

 

Hey Bill, don't suppose you have the part #'s for the later two bolt bumper brackets? The ones on ebay have ended and the seller hasn't returned my message. I assume that bumper is from a '64. If I can get two bolt brackets, I'll run the original bumper I have.
Cam

 

Front Bumper Bracket
64/66 F100/350

R.H. C4TZ-17752-A
L.H. C4TZ-17753-A

My 1966 2WD doesn't have any separate brackets. The front of the frame is shaped and drilled to accept the bumper directly.

But, my two 1966 F250 4x4 trucks do use the brackets





Chad

.