I've put my new 38r on a non EPBV pedastal but I am having no luck whatsoever finding a plug -3/4''- to fit in the exhaust housing. My plan was to remove the valve from the housing and plug the hole versus buying a new blank housing. I've tried all my local parts houses and hardware stores to no avail. Anybody got any ideas?

 

My local Napa parts store had them in stock.

 

I called them this morning.....They said they didn't have it.

 

ran bolt thru mine, cut it off even, then ran a bead (weld) around it.

 

Took your advice and drove over there....They had exactly what I needed.

Thank you!