Blowing white smoke and running rough after glow plug install
#1
09-19-2018, 06:28 PM
Join Date: Jul 2008
Location: Buckenderra
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Blowing white smoke and running rough after glow plug install
hey guys,
my mate has just come and seen me about his f250.
Hes had the glow plugs replaced at a dealership but now it’s running rough.
I have a feeling it’s going to be his wiring harness under the covers. Is there a way to check this before we go ordering parts.
Many help would be appreciated
cheers guys.
my mate has just come and seen me about his f250.
Hes had the glow plugs replaced at a dealership but now it’s running rough.
I have a feeling it’s going to be his wiring harness under the covers. Is there a way to check this before we go ordering parts.
Many help would be appreciated
cheers guys.
#4
09-20-2018, 10:39 AM
#5
09-20-2018, 03:18 PM
Join Date: Jul 2008
Location: Buckenderra
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Cheers guys
i think I’ll get under there myself, it seems I know more about these than the dealers here anyway.
The dealer first told him it didn’t have glow plugs, then said he googled it and yeah they do. 😑
i tested his GPR and found that not to be working either when he couldn’t start it. I swapped the wires to the intake air heater relay to get it going until I order a new one.
Thank guys.
i think I’ll get under there myself, it seems I know more about these than the dealers here anyway.
The dealer first told him it didn’t have glow plugs, then said he googled it and yeah they do. 😑
i tested his GPR and found that not to be working either when he couldn’t start it. I swapped the wires to the intake air heater relay to get it going until I order a new one.
Thank guys.
#6
09-20-2018, 04:08 PM
#7
09-21-2018, 03:56 PM
Cargo Master
Trending Topics
#8
09-23-2018, 11:53 AM
Thread
Thread Starter
Forum
Replies
Last Post
Clint40
1999 - 2003 7.3L Power Stroke Diesel
12
11-10-2007 12:24 PM