Hood rubber bumpers
#2
Original 1958/60 F100/700 part number:
B8C-16758-A .. Hood Bumper / Obsolete - Replaced
GREEN SALES CO. in Cincinnati OH has 17 = 800-543-4959.
1961: Ford replaced the 1958/60 hood bumper with C1TB-16758-B .. 1.12" long x .86" high .. 1/8" of the bumper head has to be cut off to fit 1958/60's properly.
B8C-16758-A .. Hood Bumper / Obsolete - Replaced
GREEN SALES CO. in Cincinnati OH has 17 = 800-543-4959.
1961: Ford replaced the 1958/60 hood bumper with C1TB-16758-B .. 1.12" long x .86" high .. 1/8" of the bumper head has to be cut off to fit 1958/60's properly.
#3
Thanks Bill. So that looks like I should have a height of just less than 9/16" and 1 inch or so wide? if my multiplication is close.
These bumpers have round holes and looks like there were four on each side. At least there are four holes on each finder. As heavy as that hood is it should squash pretty good a slight over size I think.
These bumpers have round holes and looks like there were four on each side. At least there are four holes on each finder. As heavy as that hood is it should squash pretty good a slight over size I think.
#5
Seems to be listed at Mac's
Thread
Thread Starter
Forum
Replies
Last Post
1968F250429
1967 - 1972 F-100 & Larger F-Series Trucks
9
11-16-2021 12:48 AM
vidaliaman
1967 - 1972 F-100 & Larger F-Series Trucks
5
04-13-2017 01:31 PM
MHDtr33
1967 - 1972 F-100 & Larger F-Series Trucks
4
02-06-2014 06:06 PM