Crown Vic brake line missing?
#3
You would need to fab up your own line from the Master cylinder to that brake line. I have seen people use the factory crossover line that runs on the crossmember and have a union from the factory vic hard line to the passenger side. Me personally, I would upgrade to stainless lines and build from the master down to the wheels.
Also, I would look at doing something with the upper control arm bushings, those look pretty hammered.
Sean
Also, I would look at doing something with the upper control arm bushings, those look pretty hammered.
Sean
Thread
Thread Starter
Forum
Replies
Last Post
farmboy555
1948 - 1956 F1, F100 & Larger F-Series Trucks
14
06-23-2015 05:58 PM
52F1Gary
1948 - 1956 F1, F100 & Larger F-Series Trucks
12
01-25-2015 08:02 PM