bw 1345 transfer case??
Thread Starter
|
New User
Joined: Oct 2005
Posts: 20
Likes: 0
From: Taos, NM
I have it sitting on my workbench I'm in the middle of a clutch job,(I keep getting rained out) the noise is definately internal. It is very pronounced when I rotate the yoke back and forth. If this is a problem should I have it rebuilt or trade it in? thanks for the reply!
Elder User
Joined: Dec 2002
Posts: 559
Likes: 0
From: South Carolina
This is a normal noise for the BW 1345 - I cracked mine open to reseal, and it's the oil pump. The oil pump is wrapped around the output shaft, and there is a fork in the case that prevents the pump from spinning on the shaft. What you're hearing is the nipple on the pump jumping back and forth between the ends of the fork. As far as I can see, this was never meant to be a "tight" fit. You'll only hear it when it's on the bench, or when you're rotating the shaft back and forth.
Thread
Thread Starter
Forum
Replies
Last Post
gallatingator
1973 - 1979 F-100 & Larger F-Series Trucks
2
Oct 10, 2011 01:36 PM
phillyfreak
1997 - 2006 Expedition & Navigator
4
Aug 12, 2011 11:19 PM
