Keyless Entry

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2005 | 09:52 PM

JackH

Thread Starter

New User

Joined: Jan 2005

Posts: 7

Likes: 0

Keyless Entry

My keyless entry was not working for a week or so - I didn't have time to take the truck in to the shop...Then all of the sudden 1 of the 3 remotes I have started working! The other 2 still will not work - and yes, I changed the batteries in all of them before the panic set in. Also - I posted a few months ago about my beltminder - I still can not get the alarm to stop....The instructions in my manual just don't work. I have tried a million times....

Any help or advice is greatly appreciated!

Jack H - baking to death in Florida.....

Jul 30, 2005 | 11:40 PM

iam2jimbo

Junior User

Joined: Jul 2005

Posts: 86

Likes: 0

From: Omaha

I don't have a clue on the belt minder, but on the remotes (or key frobs) Have you tryed reprograming them, your manule should tell you how to do this. I hope this helps.