front hubs
Thread Starter
|
New User
Joined: Nov 2003
Posts: 6
Likes: 0
front hubs
i have a 1999 ranger off road that have the front hub bearings going out again abd i hate to give 300-500$for new one does any body have a bearing chang over number . i'm a machinist and have a press at work ,but i need the bearing number to cross reference it i'm trying to save money wife is out of work
Last edited by flyguy 1999; May 11, 2004 at 08:16 PM.
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
I checked the Ford Manual and it only shows the hub as an assembly, it goes into zero detail about the bearing (except to say that if the bearing is shot you have to replace the whole hub assembly). No part numbers, nothing.
So you might have to take it apart and try and size the bearing yourself...
So you might have to take it apart and try and size the bearing yourself...
Posting Guru
Joined: Nov 2003
Posts: 1,071
Likes: 1
From: Concord, New Hampshire
They may have a number stamped into the seal or race, any good auto parts store will be able to cross referace them, it will prbly have a manufacture name on one side and directly across, the part number, like NSK 5106 , (thats not the number just and example) and you give that to your parts rep and theyll cross refreance, or you would measure, ID, OD, THICKNES AND seals. one side both sides none? but the number is the easyest, look hard, sometimes its on the seal and sometimes on the race.
Thread Starter
|
New User
Joined: Nov 2003
Posts: 6
Likes: 0
thank you for looking for me looks like i might get into something scary never have been into the front end off a 4 wheel drive before does any on know any secrets that i need to know before i dive into this mess
Post Fiend
Joined: Jan 2003
Posts: 9,748
Likes: 16
From: Connecticut
This thread has pretty much the whole nine yards on the PVH system. On page 3 of the thread there are some links posted to pages with pictures showing the hubs partially dissasembled:
https://www.ford-trucks.com/forums/s...d.php?t=113363
https://www.ford-trucks.com/forums/s...d.php?t=113363
Thread Starter
|
New User
Joined: Nov 2003
Posts: 6
Likes: 0
Trending Topics
Post Fiend
Joined: Dec 2001
Posts: 10,562
Likes: 4
From: South Jersey
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Logistics Pro
Joined: Sep 2002
Posts: 4,411
Likes: 1,016
From: Central KY
FX4 debuted in 2002 as the top-of-the-line Ranger. In 2003 it changed and replaced the old "off-road" package. But that doesn't have anything to do with the type of hubs used in the front end if that's what you are wondering.
New User
Joined: Jan 2004
Posts: 14
Likes: 0
From: Jefferson, Iowa
I have a 98 mazda and had the same problem I had to end up getting the whole assembly ($200). I did a whole bunch of checking around and found out that you couldnt just order the bering because the company that makes it (timken) doesnt just sell the bering, i think the guy at the bering shop told me that timken probably just makes that bering for ford and sells it just to ford for their front hub assemblys. I did go to the local auto parts store and they tried to cross reference the bering but the bering that it crossed over to didnt look a thing like the one I had.
Thread
Thread Starter
Forum
Replies
Last Post
louiss4618
1968-Present E-Series Van/Cutaway/Chassis
2
Feb 26, 2011 07:19 PM
CEP
1999 - 2003 7.3L Power Stroke Diesel
1
Mar 24, 2005 08:02 PM
