Brake Controller and vehicle connector plug
Thread Starter
|
5th Wheeling
Joined: Feb 2019
Posts: 30
Likes: 11
Brake Controller and vehicle connector plug
Hello Everyone
I have a 2008 ford f250 Super Duty and have bought a Teconsha P3 Brake controller. It comes with a wiring harness for this pickup. I cannot find the female connector, which should be somewhere around the centre/lower dash. I have followed the instructions and I am struggling to find anything which I can plug this harness into. I don't think that the pickup has ever had a pervious brake controller. Your comments would be appreciated. Thank you John
I have a 2008 ford f250 Super Duty and have bought a Teconsha P3 Brake controller. It comes with a wiring harness for this pickup. I cannot find the female connector, which should be somewhere around the centre/lower dash. I have followed the instructions and I am struggling to find anything which I can plug this harness into. I don't think that the pickup has ever had a pervious brake controller. Your comments would be appreciated. Thank you John
Laughing Gas
Joined: Oct 2014
Posts: 962
Likes: 114
From: Middle TN
Hello Everyone
I have a 2008 ford f250 Super Duty and have bought a Teconsha P3 Brake controller. It comes with a wiring harness for this pickup. I cannot find the female connector, which should be somewhere around the centre/lower dash. I have followed the instructions and I am struggling to find anything which I can plug this harness into. I don't think that the pickup has ever had a pervious brake controller. Your comments would be appreciated. Thank you John
I have a 2008 ford f250 Super Duty and have bought a Teconsha P3 Brake controller. It comes with a wiring harness for this pickup. I cannot find the female connector, which should be somewhere around the centre/lower dash. I have followed the instructions and I am struggling to find anything which I can plug this harness into. I don't think that the pickup has ever had a pervious brake controller. Your comments would be appreciated. Thank you John
Thread Starter
|
5th Wheeling
Joined: Feb 2019
Posts: 30
Likes: 11
Hello Boaterguy
Thank you for your message and comments. I managed to pop out the coin holder and "box" next to it from the dash and tucked up behind it was the plug for the brake controller. There was no way I could see it or get my hands on it. It was an easy install after that and the P3 controller works well. I am just having to learn all it can do and the settings. Thank you once again. Regards John
Thank you for your message and comments. I managed to pop out the coin holder and "box" next to it from the dash and tucked up behind it was the plug for the brake controller. There was no way I could see it or get my hands on it. It was an easy install after that and the P3 controller works well. I am just having to learn all it can do and the settings. Thank you once again. Regards John
Thread
Thread Starter
Forum
Replies
Last Post
