TTB Leaf spring setup for SD axle swap?
Thread Starter
|
Laughing Gas
Joined: Oct 2020
Posts: 785
Likes: 150
TTB Leaf spring setup for SD axle swap?
Discussing the option of putting Super Duty axles under a Bronco with a friend of mine. He has a complete 4x4 SD donor. Thinking about going leaf spring on the front. Not wanting anything crazy, just reliable and capable. He is thinking overlander. Pull his little travel trailer to Colorado, wheel it, come home kind of deal. Is there a reason not to use the F250 TTB Leaf spring setup for something like this? Looking for budget friendly, minimum custom fab. We are both capable, just short on time to spend mocking things up. I can't remember now...seems like the SD front leaf springs may be longer, which would be an advantage to using them. Anything else we may be missing?
More Turbo
Joined: Oct 2019
Posts: 558
Likes: 109
Ill chime in ,I've always done different stuff like this but never had a internet to rely on ,any way I see nothing wrong with your idea as long as the springs sit like there supposed to ,think about it and go for it
Thread
Thread Starter
Forum
Replies
Last Post
KingBigJoe
Offroad & 4x4
27
Jun 25, 2012 10:22 PM
