When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ABS DTC C0020:13-C8, I was out hunting this year and in 4x4 through a puddle I blew the abs fuse. repalced it and I could hear the pumo whirl up, but I had this abs light as well as brakes and traction control lights on contantly. Got home, forscan said another code for front right speed sensor, replaced that and cleared the code for that sensor. That has been fixed but the original abs pump code still remains. Tried to force a test via forscan on pump and it comes up with same open circuit. Any ideas on this one? I've only been able to go as far as removing wiring harness and reseating it, and looking at what I can see for wires but nothing too involved. When I setup forscan to monitor the abs pump relay in real time, it just says off. Have it booked to go into ford next week as I fear the pump has actually failed, but traction control still works without issue. Hate to spend dealer prices for what I hope to be something simple. Any ideas?
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
