So last night I installed the factory remote start with long range antenna and 2- way fob. The truck starts using lock/ unlock/ lock on the original fob and using the new 2- way fob. My problem is the dash is not displaying the remote start in the menu. I enabled the remote start and lights in Forscan using the config tab. What am I missing?

 

You need to write these values in the asbuilt data in Forscan: BdyCM 726-22-02: xxx1 xxxx xxxx and IPC 720-02-02: xxxx Axxx.

 

I'll give that a shot. I thought enabling the module would have been enough. Thank you.

 

The IPC module was the fix. Enabling the remote start in config must change the other module because that was already written.