'42 Truck
Thread Starter
|
Mountain Pass
Joined: Jul 2009
Posts: 197
Likes: 2
From: Brisbane, Australia.
'42 Truck
G'day everyone, what have I been up to ? Well , renewed interest in CB radio, but now I'm back on track. I bought a new carb, the original
throttle pedal was in a bad position, so I changed to a cable operated throttle assembly sourced from a '99 Falcon. I made a spacer to go between
the carb and manifold using a modern plastic similar to Bakelite. The aircleaner is off a 1970s Falcon.
Here's a few photos.
Cheers Steve.
throttle pedal was in a bad position, so I changed to a cable operated throttle assembly sourced from a '99 Falcon. I made a spacer to go between
the carb and manifold using a modern plastic similar to Bakelite. The aircleaner is off a 1970s Falcon.
Here's a few photos.
Cheers Steve.
Thread
Thread Starter
Forum
Replies
Last Post
