Transmission Help
Thread Starter
|
New User
Joined: Dec 2008
Posts: 2
Likes: 0
Transmission Help
Hey guys new posting here, been a member for a while (theres alot to read on here). Ive got a 03 x with the 6.8 2wd 4r100. It was flaring pretty bad for a while going into lock up, about 2 months ago the flare went away now NO lockup. Its taking more pedal to get moving and alot more slip, once you reach cruising speed tranny goes into high pressure. Told to replace the selonoid pack, got one use from a tranny shop from a tranny that lost reverse, got it home took mine out and found out the new one is not PWM and mine is, I tested my selonoid by putting 12v to pin 1 and 4 and nothing (on the pwm pack) did it to the new pack and it works. My question is what will happen if I put the non pwm in my tranny that orginaly had pwm pack in it? Couldnt find a definitive answer. Thanks in Advance for your help
Thread
Thread Starter
Forum
Replies
Last Post
fullmetalmonkey
Clutch, Transmission, Differential, Axle & Transfer Case
1
Feb 21, 2010 09:52 PM
dieselstroke
Clutch, Transmission, Differential, Axle & Transfer Case
1
Feb 26, 2005 10:06 AM
