bore dimension needed
Thread Starter
|
Senior User
Joined: Mar 2009
Posts: 291
Likes: 0
bore dimension needed
My rebuild kit arrives tomorrow.
I ordered .020 over pistons.
What is diameter bore needs to be bored to? and what is the clearance required for piston to cylinder wall?
The injectors are being worked on my Jim, I hope to be running nexr week!
Thank you, C
I ordered .020 over pistons.
What is diameter bore needs to be bored to? and what is the clearance required for piston to cylinder wall?
The injectors are being worked on my Jim, I hope to be running nexr week!
Thank you, C
Hotshot
Joined: Feb 2009
Posts: 10,410
Likes: 77
From: Plankinton, SD
Does the company you got the kit from have any recommendations? When I buy pistons, I just take them and the block to the machinist and have him bore it to the manufactures specs.
Maybe someone else can give you better info, just telling you what I do, granted it's usually a gas racing motor but still...
Maybe someone else can give you better info, just telling you what I do, granted it's usually a gas racing motor but still...
Thread Starter
|
Senior User
Joined: Mar 2009
Posts: 291
Likes: 0
[quote=427 fordman;9334787]Does the company you got the kit from have any recommendations? When I buy pistons, I just take them and the block to the machinist and have him bore it to the manufactures specs
Good idea, I'll give them a call
Thank you, C
Good idea, I'll give them a call
Thank you, C
Thread
Thread Starter
Forum
Replies
Last Post
Reconor
1987 - 1996 F150 & Larger F-Series Trucks
13
Sep 15, 2016 11:29 AM
cujo8
Brakes, Steering, Suspension, Tires, & Wheels
3
Dec 28, 2006 05:57 PM
F-150Guy
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
Mar 21, 2005 03:36 PM
