Reading Axle Tag Right? (pic)
Thread Starter
|
Tuned
Joined: Feb 2003
Posts: 335
Likes: 1
From: Houston, TX
Reading Axle Tag Right? (pic)
F250 Rear Axle Tag
Do I read this correctly as a 3.73 ratio limited slip? (My door jam sticker is blank under the axle code).My truck is a 2000 F250 Superduty 4x4 with the 7.3L PS.
Also, is the rear axle a Dana unit? I think I read in one of the FAQ's that the front axle on these trucks is a Dana 50 . . .
[edit: answered my second question by looking again at the FAQ: "All SRW trucks use a Sterling 10.5" full floating axle in the rear."]
Thanks!
Do I read this correctly as a 3.73 ratio limited slip? (My door jam sticker is blank under the axle code).My truck is a 2000 F250 Superduty 4x4 with the 7.3L PS.
Also, is the rear axle a Dana unit? I think I read in one of the FAQ's that the front axle on these trucks is a Dana 50 . . .
[edit: answered my second question by looking again at the FAQ: "All SRW trucks use a Sterling 10.5" full floating axle in the rear."]
Thanks!
Last edited by xanthias; Feb 16, 2003 at 04:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Dieseldan7.3
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
13
Feb 2, 2005 07:12 PM
xanthias
1999 - 2003 7.3L Power Stroke Diesel
6
Feb 20, 2003 05:34 AM
