o2 for b2
Thread Starter
|
New User
Joined: Mar 2010
Posts: 15
Likes: 0
o2 for b2
hi
i've got Standart's (universal) o2.sens. with 4 wires
2 white
1 black
1 grey
which of these wire is cut ?? )) for my 3wired bronco2 '87
(original conference) - oxygen sensor - Ford Truck Enthusiasts Forums
i've got Standart's (universal) o2.sens. with 4 wires
2 white
1 black
1 grey
which of these wire is cut ?? )) for my 3wired bronco2 '87
(original conference) - oxygen sensor - Ford Truck Enthusiasts Forums
Moderator
Joined: Jan 2001
Posts: 56,966
Likes: 2,728
From: Virginia
Here's a link. http://www.boschautoparts.com/Techni...sorInstall.pdf
According to that, the two universal heater wires are the white wires. So they will go to the grey/yellow and the black Ford wires.
The universal signal wire is the black wire. This will go to the darkgreen/pink Ford wire.
The universal ground wire is grey. Ford uses the exhaust pipe as a ground, so you do not need the grey wire.
According to that, the two universal heater wires are the white wires. So they will go to the grey/yellow and the black Ford wires.
The universal signal wire is the black wire. This will go to the darkgreen/pink Ford wire.
The universal ground wire is grey. Ford uses the exhaust pipe as a ground, so you do not need the grey wire.
Thread
Thread Starter
Forum
Replies
Last Post
StumpPullerF1
1987 - 1996 F150 & Larger F-Series Trucks
4
May 31, 2011 05:07 PM
terrysumner
1999 - 2016 Super Duty
3
Jan 19, 2011 09:21 AM
