When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally got my primer for the liner today. It took a lil wrist control to hold that much material in one hand bed it was worth it. I hope it works as good as it looks. I sanded the whole bed down with 40 grit paper on my D/A. I used about 10 discs. All the nooks and cranys i could not reach with the d/A i went back by hand and did. Did a real good tape job and started spraying away. I had to adjust the settings on the gun a lil to get the texture i was looking for , but one i got it set it took no time at all. It only took me about 30 min to do. That includes mixing 2 kits and spraying. This is a 4 part resin that needs to be mixed together, PLEASE do NOT mistake this for hureculiner, duplicolor, or the like GARBAGE
Did you do anything for overspray or is it not a concern?
That looks kicka$$ BTW!
Josh
Overspray? I had the complete bed and tailgate covered in painters drop cloths.(you can see it in the t-gate pic) I was quick to remove them while the liner was still wet to get a nice clean tape line
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.