front crank seal issue
Thread Starter
|
Lead Driver
Joined: Mar 2008
Posts: 7,182
Likes: 380
From: Near Los Angeles
front crank seal issue
I've had my t. cover off twice and replaced the seal both times. Because it is the '75 block, I do not have the pins to position the cover and seal on crank. I use the v. dampener for placement. I also install the sleeve over the v.dampener end. I have used two v. dampeners, thinking maybe one was bad. But still I can not stop it from leaking.
Seal was lubed prior to installation. Silicone was applied to keeper groove to prevent leakage. I've never had such probs with a seal before, and wonder if I am missing something. I use the Felpro kit.
Seal was lubed prior to installation. Silicone was applied to keeper groove to prevent leakage. I've never had such probs with a seal before, and wonder if I am missing something. I use the Felpro kit.
Thread
Thread Starter
Forum
Replies
Last Post
SEAL1
Explorer, Sport Trac, Mountaineer & Aviator
0
Dec 21, 2011 03:45 PM
