48' 6 Carb
Thread Starter
|
Cross-Country
Joined: Apr 2007
Posts: 96
Likes: 1
48' 6 Carb
Looking for a good source for a Carb for my 1948 F-1 6 cyc..
Either to have mine rebuilt or to buy a rebuild one.? I think the part number is Holley 8HA-9510-A ?? a one barrel, has vacuum ports for both the Dist. and Wipers.
I have tried to rebuild mine but I think it will take some machining to make all of the surefaces flush again.. possibly the shaft bores also. As it had all kinds of vacuum leaks...
Or if anyone has a good one for sale !?
thanks..
BC
Either to have mine rebuilt or to buy a rebuild one.? I think the part number is Holley 8HA-9510-A ?? a one barrel, has vacuum ports for both the Dist. and Wipers.
I have tried to rebuild mine but I think it will take some machining to make all of the surefaces flush again.. possibly the shaft bores also. As it had all kinds of vacuum leaks...
Or if anyone has a good one for sale !?
thanks..
BC
Junior User
Joined: Feb 2007
Posts: 72
Likes: 0
From: Kewanee,Il.
Does the carb have a metal tag on it? Should be on the top under the screw. And if it does, could you read me the part# and list#. I think this is the same carb I have, but the list# is unreadable. The part# on mine is 8MTH-9510A. Thanks Bob
Thread Starter
|
Cross-Country
Joined: Apr 2007
Posts: 96
Likes: 1
No Tag on carb
BobNo tag on the carb. there is a cast nunber on the body "Model 7HT"...might have to take the carb off and look under the body to see if there are other numbers.thanks..BC
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
Looking for a good source for a Carb for my 1948 F-1 6 cyl. Either to have mine rebuilt or to buy a rebuild one?
I think the part number is Holley 8HA-9510-A? = 1949/51 Passenger Cars 226 I-6 a one barrel, has vacuum ports for both the Dist. and Wipers.
I have tried to rebuild mine but I think it will take some machining to make all of the surefaces flush again.. possibly the shaft bores also. As it had all kinds of vacuum leaks.
Cast number on the body Model 7HT
I think the part number is Holley 8HA-9510-A? = 1949/51 Passenger Cars 226 I-6 a one barrel, has vacuum ports for both the Dist. and Wipers.
I have tried to rebuild mine but I think it will take some machining to make all of the surefaces flush again.. possibly the shaft bores also. As it had all kinds of vacuum leaks.
Cast number on the body Model 7HT
7HT-9510-A .. IV Holley Carburetor / Obsolete
A7A-9502-A .. Carburetor Gasket Set / Obsolete
A7A-9590-A .. Carburetor Overhaul Kit / Obsolete
Fits: 1948/51 F1 thru F6 226 I-6 // I found EIGHT of the gasket sets only.
-----------------------------------------------------------------------
8MTH-9510-A .. 1V Holley Carburetor / Fits: 1950/52 F6 254 I-6 / 1953 F600 254 I-6.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
North Hollywood Carb & Ignition located in North Hollywood CA may have parts or a complete carb.
This place has a lotta stuff...as they used to do all the work for Harrah's Auto Collection.
Another source that might have the carb or parts is earlyfordstore.com located in San Dimas CA.
This place is not only a parts store but a museum on all things Ford...and is located in the original 1916 Ford Dealership building.
Engler Bros Auto Parts on Pico Blvd. in Santa Monica is the best dang autoparts store here in LA LA Land for older vehicles.
Thread Starter
|
Cross-Country
Joined: Apr 2007
Posts: 96
Likes: 1
Bill
Thanks. that should give me enough lead to keep me busy for a while. I checked with Recarbo on their price to rebuild it.. $171.00
I am in Nor Cal.... would be nice if those store were closer. But there are a few up this way too.. I'll get around to checking all of them.
Thanks. that should give me enough lead to keep me busy for a while. I checked with Recarbo on their price to rebuild it.. $171.00
I am in Nor Cal.... would be nice if those store were closer. But there are a few up this way too.. I'll get around to checking all of them.
Thread
Thread Starter
Forum
Replies
Last Post
gaylandt
1973 - 1979 F-100 & Larger F-Series Trucks
3
Dec 24, 2015 10:17 PM
Timehunter
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
19
Dec 21, 2015 12:23 PM
gordo2
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
12
Aug 31, 2015 11:01 AM
74broncosport
Clutch, Transmission, Differential, Axle & Transfer Case
5
Oct 31, 2008 06:16 PM
