rear axle seals??
Thread Starter
|
Senior User
Joined: Mar 2009
Posts: 470
Likes: 0
From: Washington County, Penna
rear axle seals??
hey guys just curious
1. in the 90 f250 is it a semi-floating rear axle or a full-floating rear, i know its a 3.55 without posi...
and 2. how are the axles held in on these, i would not think ford woulda used the dreaded c clips
gotta do the seal on the drivers side axle, figure might as welol do both sides seals and bearings
1. in the 90 f250 is it a semi-floating rear axle or a full-floating rear, i know its a 3.55 without posi...
and 2. how are the axles held in on these, i would not think ford woulda used the dreaded c clips
gotta do the seal on the drivers side axle, figure might as welol do both sides seals and bearings
Posting Guru
Joined: May 2007
Posts: 1,208
Likes: 2
From: North Reading Mass
The door jamb should have a vehicle information sticker that will list a code for the axle. Most F 250s have the semi floating design that should be retained by the brake backing plate.
regards
rikard
regards
rikard
Thread
Thread Starter
Forum
Replies
Last Post
Dillabough54
1987 - 1996 F150 & Larger F-Series Trucks
4
Aug 12, 2016 08:17 PM
FordOwnerJoey
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
11
Nov 6, 2013 02:30 PM
