Fuel Problems
Thread Starter
|
Freshman User
Joined: Mar 2010
Posts: 46
Likes: 0
Fuel Problems
Ok, I cant seem to find my previous thread, so Ill start over. Im having problems (CYLINDER #3 comes up with a misfire), and it seems to be an injector issue...I have checked fuel pressusre, and it holds a pretty steady 60 psi, will driving it with a bad injector do any more damage/
Fleet Mechanic
Joined: Jun 2006
Posts: 1,589
Likes: 20
Ok, I cant seem to find my previous thread, so Ill start over. Im having problems (CYLINDER #3 comes up with a misfire), and it seems to be an injector issue...I have checked fuel pressusre, and it holds a pretty steady 60 psi, will driving it with a bad injector do any more damage/
Remove the injector connector from the wire harness and check the connector pins to be sure the sockets in the wire harness connector are tight. Then make sure it seats on the FI connector and the retainer clip clicks.
DSMMH
Thread Starter
|
Freshman User
Joined: Mar 2010
Posts: 46
Likes: 0
I did check the plug, it looked ok. I did notice that when it was plugged in, the engine made a clicking noise that seemed to be coming from that injector, and with it unplugged, the noise went away but with no change in the way it idled. How can I tell if it is sticking open?
Thread
Thread Starter
Forum
Replies
Last Post
skidley
1987 - 1996 F150 & Larger F-Series Trucks
3
Jul 19, 2016 11:33 AM
eureka16
1968-Present E-Series Van/Cutaway/Chassis
21
Jun 5, 2016 04:50 PM
eureka16
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jun 4, 2016 10:11 AM
mendeldl
Explorer, Sport Trac, Mountaineer & Aviator
4
Nov 27, 2007 10:17 PM
