2.8 valve clatter
Thread Starter
|
New User
Joined: Jan 2003
Posts: 9
Likes: 1
From: Coolidge Ariz.
2.8 valve clatter
Hi all,
I have been away from the forum for a while, and now I am back with a question. I redid the intake portion of his 84 Bronco II. The engine is a 2.8 V6. I adjusted the valves to the specs in the book , but they are still noisy little suckers! LOL There were new lifters put in as well as pushrods. I was wondering if anyone had any ideas, or if there is a way to put in a hydraulic valve train in. I am so glad I have a 88 Bronco II, do not have to put up with the noise.
I have been away from the forum for a while, and now I am back with a question. I redid the intake portion of his 84 Bronco II. The engine is a 2.8 V6. I adjusted the valves to the specs in the book , but they are still noisy little suckers! LOL There were new lifters put in as well as pushrods. I was wondering if anyone had any ideas, or if there is a way to put in a hydraulic valve train in. I am so glad I have a 88 Bronco II, do not have to put up with the noise.
Thread
Thread Starter
Forum
Replies
Last Post
Milwaukee1979F150
Bronco II
19
Jul 24, 2009 11:56 PM
