Down Shifting Question
Thread Starter
|
Freshman User
Joined: Feb 2010
Posts: 44
Likes: 0
From: Southeastern PA
Down Shifting Question
My 53' F-100 has a 3 on tree standard transmission. I can't downshift into first while the truck is moving.
Is that normal or what's up?
Thanks.
Howie
Is that normal or what's up?
Thanks.
Howie
Post Fiend
Joined: May 2008
Posts: 7,641
Likes: 21
From: Poway, Ca.
Yep, that's normal. But the good news is if you ever get a ticket for rolling through a stop sign, you can beat it by telling the judge it's impossible to get it into a forward gear without coming to a complete stop.
I did that once.
I did that once.
Junior User
Joined: Jun 2004
Posts: 97
Likes: 0
As my brother in law, who hauls lumber in Oregon, comments after a noisy double-clutch downshift, 'just counting the gears"
Trending Topics
Hotshot
Joined: Jan 2001
Posts: 16,882
Likes: 3,126
From: SE Wisc. (the Rust Belt)
Down shifting into a lower gear, at least on the crashbox tranny, isn't all that hard once you've figured it out. In my F-2 when I come to a corner and need to down shift I push the clutch pedal in, hold it in and goose the accellerator a little, pump the clutch and then down shift. It takes pratice but it's not all that hard. I also have a F-1 panel and don't remember having the downshifting problem. I'll have to take it down the road tonight and see what happens.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Mountain Pass
Joined: May 2004
Posts: 145
Likes: 16
From: Jonesborough, TN
My other automotive vises are Crosleys, they have no synchros in any gears. I need to retrain every spring but I can go up and down with minimal grinding on 90% of my shifts once I get back into practice. Years ago when I drove them more it was closer to 99%. I haven't tried going in to 1st on my F1 yet, I have only put about 70 miles on it since I got it. Mostly in the last few days. I find the flathead V8 has enough torque that I don't seem to need to go in to 1st accept when I'm stopped. As I drive more I'm sure I will give it a try.
The conventional method going down, is to pull in to neutral let the clutch out goose the engine up to about the speed it would be turning in the lower gear, push the clutch in and gently push it into the lower gear. When your good you don't need the clutch accept to get started from a stop.
Years ago I lost the clutch linkage on a Crosley following the owner of the Crosley I was driving through his home town. I managed to drive it all the way back to his house without the clutch, needed to coast through a few stop signs. Owner was amazed when he asked when it happened and I told him on the other side of town.
The conventional method going down, is to pull in to neutral let the clutch out goose the engine up to about the speed it would be turning in the lower gear, push the clutch in and gently push it into the lower gear. When your good you don't need the clutch accept to get started from a stop.
Years ago I lost the clutch linkage on a Crosley following the owner of the Crosley I was driving through his home town. I managed to drive it all the way back to his house without the clutch, needed to coast through a few stop signs. Owner was amazed when he asked when it happened and I told him on the other side of town.
Thread
Thread Starter
Forum
Replies
Last Post
