When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I figure its not worth the effort to change the inner & outer Cs.
The Quigley fabricated spring perches are welded into the upper arm of the inner Cs.
I have a mid height steering arm off the outer Cs, and there isn't room to mount the Crane outer Cs as they use top mounted steering arms.
Then again I see this picture and I guess I could mount the outer Cs.
Hmmm then I'd guess that I either have to modify the:
Dana inner Cs from ball joint to kingpin in order to mate up with the outer Cs
- or -
Modify the Crane outer Cs from kingpin to ball joints to in order to mate up with the inner Cs Hmmm I wonder if that is even doable?
Not at work...today is my day off...and...I only went in for three hours!!! Spent the rest of the day running errands and doing chores...soon I'm going to shut down the 'puter and watch the Saawx!!!