no spark!
Thread Starter
|
New User
Joined: Jul 2008
Posts: 3
Likes: 0
no spark!
I have a 90 f150 with a 4.9l , and a 5 spd. the truck turns over just wont crank up. its not getting no spark. i changed the coil and the control module. still no spark and idea on what it could be? please help
Fleet Owner
Joined: Aug 2005
Posts: 23,666
Likes: 301
From: Easton,Ks
If you have power at both small wires on the coil with the key in both the on and start position with a test light (no meter) then as B Dobz said above change out the distributor.
Or replace the PIP sensor (AKA Stator) inside of the distributor you take out and put it back in. You will need to time it with a timing light with the SPOUT removed.
Or replace the PIP sensor (AKA Stator) inside of the distributor you take out and put it back in. You will need to time it with a timing light with the SPOUT removed.
Thread
Thread Starter
Forum
Replies
Last Post
tjs_79ford
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
11
Sep 20, 2009 11:30 AM
longbowhunter
1987 - 1996 F150 & Larger F-Series Trucks
7
Mar 29, 2008 12:44 PM
