Gauge pods
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
Gauge pods
I will be getting a pillar pod and gauges soon and need some opinions. I am going to do the Auber digital EGT gauge because its cheaper than a regular gauge. And i will be getting a boost and tranny temp cuz i got an auto. Now my question is... should i get a double pod for just those two or get a triple pod which is actually cheaper than a double pod and find another gauge to put in there? And what should that gauge be?
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
<input id="gwProxy" type="hidden"><!--Session data--><input onclick="jsCall();" id="jsProxy" type="hidden">
Senior User
Joined: Feb 2010
Posts: 443
Likes: 0
From: Bear, DE
I looked it up and your still going to need the actual probe for the exhaust.
Digital EGT Thermometer/Pyrometer with analog output [SYL-1812RA] - $78.50 : auberins.com, Temperature control solutions for home and industry
I did the math real quick and I paid $145 for my pyro gauge kit (sensor and gauge), that auberins one runs like $115. So yea, it's a bit cheaper but when mounted my install will be cleaner.
I just bought my stuff from the diesel site (got a 3 pod pillar, pryo gauge, temp gauge and a trans cooler). I plan to add boost to the motor, so I opted to buy the 3 pod.
Digital EGT Thermometer/Pyrometer with analog output [SYL-1812RA] - $78.50 : auberins.com, Temperature control solutions for home and industry
I did the math real quick and I paid $145 for my pyro gauge kit (sensor and gauge), that auberins one runs like $115. So yea, it's a bit cheaper but when mounted my install will be cleaner.
I just bought my stuff from the diesel site (got a 3 pod pillar, pryo gauge, temp gauge and a trans cooler). I plan to add boost to the motor, so I opted to buy the 3 pod.
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
Hm, I haven't seen that particular link you just posted. This is what i had in mind.
Automobile Multimeter for EGT, Boost, Red [SYL-1813R] - $48.50 : auberins.com, Temperature control solutions for home and industry
for the gauge
EGT sensor with NPT thread [TC-KEGT-NPT] - $36.00 : auberins.com, Temperature control solutions for home and industry
for the sensor.
Which would come out to about $90
Automobile Multimeter for EGT, Boost, Red [SYL-1813R] - $48.50 : auberins.com, Temperature control solutions for home and industry
for the gauge
EGT sensor with NPT thread [TC-KEGT-NPT] - $36.00 : auberins.com, Temperature control solutions for home and industry
for the sensor.
Which would come out to about $90
PREMIUM SPONSOR
Joined: Sep 2003
Posts: 2,630
Likes: 217
From: North East Ohio
Wow, that is cheap, but how would yo mount it?
Keep in mind that is a single DIN but is still BIG (deep)...
Keep in mind that is a single DIN but is still BIG (deep)...
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
https://www.ford-trucks.com/forums/8...egt-guage.html
Im doing it just like Richdawg did, Its going to go right next to the wait to start light.
DIN?
Im doing it just like Richdawg did, Its going to go right next to the wait to start light.
DIN?
Thread Starter
|
Postmaster
Joined: Jun 2009
Posts: 2,566
Likes: 1
From: Monroe/Ellensburg, WA
Also, Where would be a good place to get really good prices on some gauges. I was gonna go with Dipricol Optix but after talking with Dale at Tymar, They have discontinued them for some reason.
So what are some other options?
So what are some other options?
Thread
Thread Starter
Forum
Replies
Last Post
rcwoods
Lightning, Harley-Davidson F-150, Roush F-150 & Saleen F-150
9
Dec 15, 2003 04:05 PM
