maf sensor
Thread Starter
|
Freshman User
Joined: Aug 2006
Posts: 35
Likes: 0
maf sensor
ive got a 94 explorer with a 4.0 that has been sitting for a year with a bad intake gasket so the other day i put a new one on now it only runs fair with the maf unpluged ive changed the sensor but still the same i hope its a sensor some where and i dont have to put another gasket on allso the check engine light is not on unless i unplug the sensor any ideas thanks
Logistics Pro
Joined: Jun 2009
Posts: 4,817
Likes: 83
From: Cedar Rapids, IA
Sounds like you probably have a bad vacuum leak somewhere. Maybe you didn't get the intake air tubing installed correctly, the tubing has a crack in it, or you have some other vacuum leak. Have you checked all the vacuum hoses, PCV elbow, EGR valve, etc.?
-Rod
-Rod
Cargo Master
Joined: Aug 2003
Posts: 3,263
Likes: 92
From: BC Canada
Only 50/50 that this will signal and only IF you hit the leak..
Freshman User
Joined: Oct 2009
Posts: 35
Likes: 0
From: Waco, Texas
If you don't have a smoke machine it beats chasing lines and gaskets until you lose your mind. Been there, maybe I still am. Pass the ether!!!
Cargo Master
Joined: Aug 2003
Posts: 3,263
Likes: 92
From: BC Canada
Built my own smoker for $45.00.... works for the evap leaks that cant be found with ether!!!
Thread
Thread Starter
Forum
Replies
Last Post
