no start need help
Thread Starter
|
Junior User
Joined: Dec 2009
Posts: 92
Likes: 0
no start need help
hello everyone I bought a 2005 F250 a a lil less than a year ago. it is a crew cab SRW 2 wheel drive truck and it is stock as far as i can tell even the stock head bolts. i am also new to the diesel world it has the 6.0 psd in it. nice truck i love it but can't seem to get it going. I notice the truck started to get hard to start. than one morning it did not start. the batteries are 4 months old and i change the fuel filters i notice that they were black very dirty. still no start came to this site to do some reading i check the FICM and it was showing 48 volts and i notice i had a 4 screw and not a 7 screw. i could not drain the water seperator becaues i found that it was stripped i bought the new one form international (the one that do not sit flush in the housing) i need to get the old plugg out. is there any things else that could be check to get my truck running again.
FTE Leadership Emeritus
Joined: Aug 2007
Posts: 42,085
Likes: 6
From: Lakewood, Ca.
Bismic put together a great checklist for this that's in the tech folder sticky at the top of this page....here's a link: https://www.ford-trucks.com/forums/8...condition.html
