front receiver
Mountain Pass
Joined: Jan 2003
Posts: 102
Likes: 1
There is a place up in Springfield OR that will sell you a custom bumper as a kit. You weld it together and paint it and save hundreds. They sell finished ones as well and the prices are about the best I have seen.
Beast Bumpers
Beast Bumpers
I was always a little disappointed in the choice for bumpers for my '90. Jeffs Bronco Graveyard is the only place I found decent ones...
Chris.
Posting Guru
Joined: Dec 2009
Posts: 2,322
Likes: 2
From: Dairy, OR
When I talked to the guy on the phone he said he could make a bumper for just about anything. I suggest calling or emailing them with what you want.
Cargo Master
Joined: Mar 2006
Posts: 2,789
Likes: 5
From: Sand GAp, KY
I am currently biulding bumpers for mine at work. Idid a small side job for them to get the 1/4x8x8 inch tube steel. I have done all of the angle work on the ends of the front one and as soon as I can get the truck in my bay I will fit it to the front horns of the frame. I ordered the piece of tube for a reciever and will be putting it through the front one so I can hook to it. I also put one of those marine plug kits in it for my block heater. The rear one will get the set cut out in the center and I will make the ends with weather tite doors to act as tool storage. I just couldn't see paying the money for one that was already made when I could build what I wanted front and rear for less than $100 lol.
Elder User
Joined: Sep 2007
Posts: 518
Likes: 0
From: Huntsville, TX
We have the Ranch hand front bumper replacement on most of our trucks around here. They are not on the website anymore but a simple phone call gets you one. Here is a pic of the one for 97-03.
Cargo Master
Joined: Mar 2006
Posts: 2,789
Likes: 5
From: Sand GAp, KY
That is cool! Mine will be nothing that fancy lol. But then again some of my hunting trips would take a toll on a bumper like that lol. I don't drink and hunt at the same time but we do get pretty messed up after dark and I seem to find trees getting back to our trailer. By the way it is all on private land, no drinking and driving on public roads. Two years ago I missed the driveway and did a number on my pass fender and door. That almost made me cry lol.
Cargo Master
Joined: Mar 2006
Posts: 2,789
Likes: 5
From: Sand GAp, KY
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
Post Fiend
Joined: Mar 2009
Posts: 6,243
Likes: 2
From: Chicago and Mt Carroll IL
check out these guys, they sell a bumper with a reciever and whinch mounts
Heavy Duty Winch Bumpers for 1992-1998, Ford F150-F550, Bronco Ford Trucks by BUCKSTOP Truckware
Heavy Duty Winch Bumpers for 1992-1998, Ford F150-F550, Bronco Ford Trucks by BUCKSTOP Truckware
Freshman User
Joined: Dec 2009
Posts: 33
Likes: 0
Here ya go, weld that sucker up:
Buyers Standard Receiver Tube — 2in. Mount, 24in.L, Model# RT25824B | Hitch Adapters | Northern Tool + Equipment
$35.
Buyers Standard Receiver Tube — 2in. Mount, 24in.L, Model# RT25824B | Hitch Adapters | Northern Tool + Equipment
$35.
i ain't rite
Joined: Mar 2005
Posts: 65,558
Likes: 5,591
From: Marlboro Mental Hospital.
i have one on my 88.
it came off an old dodge pickup in the junkyard i got for $5, and cut to fit in the bumper/plow frame.
it is welded to the frame/bumper so everything can be removed if needed.
the bumper is made of 10 inch channel steel.
it came off an old dodge pickup in the junkyard i got for $5, and cut to fit in the bumper/plow frame.
it is welded to the frame/bumper so everything can be removed if needed.
the bumper is made of 10 inch channel steel.
Post Fiend
Joined: Mar 2009
Posts: 6,243
Likes: 2
From: Chicago and Mt Carroll IL
Sorry, only been in the IDI forums since getting the 450 in December. So John should be about old enough to get behind the wheel then<g>.