Again FE motor

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 1999 | 07:37 PM

GWB

Thread Starter

Senior User

Joined: Oct 1999

Posts: 194

Likes: 0

From: Washington

Again FE motor

Dragged home a big piece of a 76 4x4 and the no. on the intake was C4SE 9425 A and heads were C7AE A just wondering what they came from. look back though archives and also was wondering again where the no. are on the block. Hey anybody need a 4x4 frame.

Nov 15, 1999 | 09:04 AM

j.frank

Guest

Posts: n/a

Again FE motor

heads are the regular 1967 352,390,428 heads. the intake is a 1964. c4=1964, c7=1967. if the intake is from a 64 car [no 352s in pickups until 1965] it should have an oil filler neck sticking out of the front of it.

Nov 15, 1999 | 12:33 PM

bigblue

Senior User

Joined: Sep 1999

Posts: 176

Likes: 0

From: Minneapolis

Again FE motor

Nov 15, 1999 | 10:42 PM

GWB

Thread Starter

Senior User

Joined: Oct 1999

Posts: 194

Likes: 0

From: Washington

Again FE motor

Yes, The oil filler is in the intake, Just was wondering if I can run solid valve covers and how the PVC was set up. And how would you determine what this intake came off. that is what kind of car. On a diffrent subject on valve covers If you run K&N filter where the PVC valve is how is this good or bad and does it affect engine vaccum
thanks in advance