56 F100 Project
Thread Starter
|
Elder User
Joined: Oct 2002
Posts: 713
Likes: 0
From: Kearney, Nebraska
Dallas
I believe it is 20 Gallon. I had Randy at Dynamic Ride get if for me. Its been long enough since I got it that I will have to check with him. If you come down for Cruise nite I believe Randy will be at the house.
Good Day but it was Damn Hot! Got the Engine and Transmission in by myself. Let me tell you that was about more that I could handle. I will post some photos tomorrow.
I believe it is 20 Gallon. I had Randy at Dynamic Ride get if for me. Its been long enough since I got it that I will have to check with him. If you come down for Cruise nite I believe Randy will be at the house.
Good Day but it was Damn Hot! Got the Engine and Transmission in by myself. Let me tell you that was about more that I could handle. I will post some photos tomorrow.
Thread Starter
|
Elder User
Joined: Oct 2002
Posts: 713
Likes: 0
From: Kearney, Nebraska
Progress
MAN IS IT HOT!!!! But that didn't stop me - I got the Engine and Transmission in yesterday (Did it all alone and lost 13 lbs doing it)! Looks good and everything seems to be where it should be - WHEW! I'm Getting Excited!! Here some photos. I will have it on Display Cruise Nite at the House!
Super Moderator
Joined: Dec 2005
Posts: 208,495
Likes: 410
From: Omaha/Elkhorn, NE
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Elder User
Joined: Oct 2002
Posts: 713
Likes: 0
From: Kearney, Nebraska
Box Together and Sitting on Frame
Got the Box on today. Started on it last weekend and threw my Back out of wack! Still Sore but got to keep moving forward so I can keep ahead of Pat! The Fuel Cell is sitting a little too high so will have to shim that down about 3/4 of an inch. The Box Frame doesn't quite match the frame holes so I am going to have to redrill the holes on the frame. Guess that's why we put them together then tear them apart again!
Box fit together
Box Sitting on Frame
The Two Fords Together - The 69 is getting Jealous so I had to put a picture of him in thread to make him feel better!
Box fit together
Box Sitting on Frame
The Two Fords Together - The 69 is getting Jealous so I had to put a picture of him in thread to make him feel better!
